The Wasp Drive is a pedal designed and built for every musical genre, it adapts perfectly to any effect chain, any pick-up and any type of amplifier, from the clean channel to the hi-gain.

The main uses can be:

 

MAIN DRIVE: it goes from clean, very crystalline and dynamic sounds, up to a '90s crunch, with the "Gain" and "+" controls.

SECONDARY DRIVE: to elevate your sound during the solo, without damage to the sound created by the previous chains.

BOOSTER: perfect for bluesman who want to get something unique to their tube amplifier, or it can be connected to the end of the effects chain, so that it guarantees an additional feature to your sound, making it more sparkling and crystalline, with its medium-high timbre .

 

CONTROLS

 

GAIN: This knob sets the amplification gain of the signal. Halfway it keeps the signal very clean, while, if it is set at 3 o'clock, you reach a full-bodied crunch.

HI CUT: This knob manages the tone control; at minimum there is an emphasis of the medium / high frequencies, bringing it to the right, these will be lowered.

VOLUME: This knob sets the output level of the pedal. If set fully counterclockwise, the pedal will not produce any sound.

FAT: If set upward, this switch changes the cutoff frequency of the tone control, increasing the presence of low frequencies.

+: By setting this selector up, the signal is amplified by 10.

FOOTSWITCH: When it is pressed activates the pedal, otherwise the pedal is in truebypass mode.

LED: When the pedal is on, the LED lights up.

9 V POWER JACK: This is the power connector. The power supply to be used must guarantee 9 V and must have a negative central pole.

 

TECHNICAL DETAILS                                                                                                                                                               

Dimensions: 9.5 * 8.1 * 5.4 cm

Weight: c.a. 180 g

Consumption a.c. 12 mA

PRICE 160 €

without shipping or other customization